08-16-2015 05:33 AM - edited 03-11-2019 11:26 PM
Hi There,
I have got an SLA setup on a Cisco ASA 5520 running ver 8.2(1),
I a looking to monitor the "Latest RTT" stats, I am struggling to find the actual OID for this, is it possible?
Entry number: 126020190
Modification time: 09:47:09.109 UTC Sun Aug 16 2015
Number of Octets Used by this Entry: 1480
Number of operations attempted: 54
Number of operations skipped: 0
Current seconds left in Life: Forever
Operational state of entry: Active
Last time this entry was reset: Never
Connection loss occurred: FALSE
Timeout occurred: FALSE
Over thresholds occurred: FALSE
Latest RTT (milliseconds): 30
Latest operation start time: 12:26:09.112 UTC Sun Aug 16 2015
Latest operation return code: OK
RTT Values:
RTTAvg: 30 RTTMin: 30 RTTMax: 30
NumOfRTT: 3 RTTSum: 90 RTTSum2: 2700
Thanks,
Kevin
08-16-2015 06:13 PM
Hi Kevin,
a good starting point to further drill down is:
Especially this (rttMonLatestRttOperCompletionTime):
and this (rttMonLatestRttOperSense):
Rgds, MiKa
08-16-2015 11:51 PM
Thanks MiKa,
I did try previously to query those OID's on the ASA but no result. I am not sure whether there are any OID's specifically for the ASA for SLA monitoring.
Regards,
Kevin
08-20-2015 04:54 AM
Hi Kevindran,
I was a little bit hasty with my comment. Unfortunately ASA doesn't support the Cisco rttMon MIB.
Sorry and best regards, MiKa
08-17-2015 06:03 AM
Unless they added OIDs for this in the newer releases, I don't think their was ever an OID to monitor SLA's/Trackers on an ASA. I believe an SLA or Tracker creates a specific log event when it changes, so you could use EEM or a logging rule to generate an SNMP or syslog alert.
08-18-2015 03:52 AM
Thanks, I think that is probably the way I would have to go.
Regards,
Kevin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide