05-23-2016 12:49 AM - edited 03-12-2019 12:47 AM
Hello all,
Good day. I'm looking for a way to forward all logs (regardless type of messages generated) to our syslog servers. How to do it via ASDM ?
Thanks very much.
Alex
Solved! Go to Solution.
05-23-2016 08:28 AM
Hi Alex,
Please check the screenshot attached.
You need
Then under
Make sure the server is reachable from the ASA.
Equivalent ASA CLI config:
logging enable
logging trap debugging
logging host inside <server ip>
Regards,
Aditya
Please rate helpful posts and mark correct answers.
05-23-2016 07:07 AM
Hi Alexander
On your your ASDM, Configuration, Device Management, Logging and then Syslog servers. Click add and you can enter the info from there.
Regards
Jay
05-23-2016 08:28 AM
Hi Alex,
Please check the screenshot attached.
You need
Then under
Make sure the server is reachable from the ASA.
Equivalent ASA CLI config:
logging enable
logging trap debugging
logging host inside <server ip>
Regards,
Aditya
Please rate helpful posts and mark correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide