08-18-2021 09:25 AM
Hello All,
I have a 2100 appliance running ASA image on it, I was able to point the ASA module to TACACS server for authentication however when I try the 2100 chassis itself, the AAA option is not available under platform settings (GUI).
I have another pair of 4100s and I can see the option and its working fine.
xxxxxxx# show system de
Systems:
Name: xxxxxxx
Mode: Stand Alone
System IP Address: x.x.x.x
System IPv6 Address: ::
System Owner:
System Site:
Description for System:
aur1inc5fp101# show system firmware
MANAGER:
Boot Loader:
Firmware-Vers: 1009.0200.0213
System:
Running-Vers: 2.4(1.265)
Platform-Vers: 2.4.1.265
Package-Vers: 9.10.1.42
NPU:
Running-Vers: 2.4(1.265)
Platform-Vers: 2.4.1.265
Package-Vers: 9.10.1.42
Service Manager:
Running-Vers: 2.4(1.265)
Platform-Vers: 2.4.1.265
Package-Vers: 9.10.1.42
xxxxxxx#
Any particular reason why I am not able to configure TACACS on the 2100s?
Solved! Go to Solution.
08-18-2021 09:45 AM
08-18-2021 09:35 AM
Hi @julomban1
The 2100 series appliances do not have a full FXOS, and only supports a subset of the features when compared to the 4100/9300 hardware.
08-18-2021 09:38 AM
Thanks Rob, so I can only use local authentication for the chassis?
08-18-2021 09:45 AM
Yes, local authentication only
08-18-2021 12:29 PM
Thanks, Rob,
Do u know if there is an enhancement request to allow this in the future?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide