03-27-2025 12:48 PM
Hoping someone can clarify this for me.
I have a FTD 1120, v7.4.2.1-30 being admin'd thru FDM. In the Networks section the values are all set at a /24 or smaller. Can Cisco handle a /17 or do I have to create multiple /24's and them group them together. All of Cisco documents show is a /24 or single subnet.
Thanks in advance.
03-28-2025 02:16 PM
Can you elaborate a bit more on what network objects you are referring to? Perhaps you can also include a screenshot.
Thank you for rating helpful posts!
03-31-2025 09:01 AM - edited 03-31-2025 09:04 AM
Objects > Networks
When I add a new network like this, the rest of our network and VPN connection cannot see and connect.
I have to break them down to individual /24 networks then combine them into a group like this. But this still did not work for the Site-to-Site VPN.
I ended up breaking it down Barny style for Cisco to complete the connection
Hope this helps some.
03-31-2025 09:05 AM
You use superNet for multi' that sure not work the ftd will mark it as conflict.
MHM
03-31-2025 10:01 AM
I originally tried the superNet. Let the VPN simmer for 24 hours and it still would not connect. I changed back to /24 and the VPN instantly connected. I'm sure it is something I'm missing.
I managed to go 16 years in IT without having to deal with Cisco products. some setting are just stupid.
03-31-2025 11:33 AM
Are you trying to reach resources via an IPsec VPN? Or something else? Cisco firewalls, FDM-managed or otherwise, can certainly handle a /17. However, there may be other factors you haven't mentioned so far that prevent your connectivity from working as desired in your case.
04-03-2025 12:25 PM
That is correct. We have Meraki MX devices at our off site location. When we create the supernet on our FTD to the MX's the MX sites are not able to see any of the IP Address in the supernet and the VPN Status just show a red status light for the Non-Meraki Peers. If we dismantle the supernet and set the subnets to a max of /24 everything works fine.
I am not sure is using a FTD to connect all these sites is the best idea, would prefer to use a MX at our HQ but this is what I have to work with.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide