Hello,
Is there any possibilities to assign a secondary ip address on a physical address on FPR3k (FMC managed)?
i.e:
Ethernet1/10 ip add 3.3.3.3/24
Ethernet1/10 ip add 3.3.3.4/24 secondary
Ethernet1/10 ip add 3.3.3.5/24 secondary
I know it is possible to do this on Fortigate or Sophos but on FPR, it seems a bit tricky...
I do not really want to use multiple different physical interfaces... (this is the last resort)
The goal is to create multiple IPSEC VPN to Umbrella for user traffic on the same Data Centers (EU - Paris and London and Prague)
VPN 1: physical interface Ethernet1/10 ip add 3.3.3.3/24 (VTI)---------> Umbrella Data Center EU-Paris
VPN 2: physical interface Ethernet1/10 ip add 3.3.3.4/24 (VTI)--------->Umbrella Data Center EU-Paris
VPN 3: physical interface Ethernet1/10 ip add 3.3.3.5/24 (VTI)--------->Umbrella Data Center EU-Paris
VPN 4: physical interface Ethernet1/10 ip add 3.3.3.6/24 (VTI)--------->Umbrella Data Center EU-London
VPN 5: physical interface Ethernet1/10 ip add 3.3.3.7/24 (VTI)--------->Umbrella Data Center EU-London
VPN 6: physical interface Ethernet1/10 ip add 3.3.3.8/24 (VTI)--------->Umbrella Data Center EU-London
