Cisco Prime with other vendor firewall

[Karvel]

My project is to connect a firewall WAN interface to Cisco Prime, I should keep tracking the interface utilization on my firewall until it reaches a specific bandwidth. when for example the bandwidth reaches 30 Mb, I want to receive a notification or an email from Cisco prime.

Is this possible to be done?

If it is possible, is there any document that helps?

thanks you.

[Marvin Rhoads]

It is possible if you have the MIB for the non-Cisco firewall.

Follow this procedure:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-9/user/guide/bk_CiscoPrimeInfrastructure_3_9_0_UserGuide/monitor_device_and_network_health_and_performance.html#task_1080316