10-17-2014 04:16 AM - edited 02-21-2020 05:18 AM
Hello Cisco Team,
I would like to seek your assistance on how to install and configure the Web security essential and And application visibility control license from the ASA5512-SSD120-K9?
Do you happen to have a PDF documentation guide and process on how to install the licenses.
Best regards,
Ed
Solved! Go to Solution.
10-17-2014 03:20 PM
First you need to get the CX module running and accessible so that you can manage the Next Gen Firewall services (WSE, AVC and IPS). It's managed separately from the base ASA Follow the Quick Start Guide if you haven't done that yet.
Then log into PRSM (the GUI) and follow the User Guide section on Managing System Licenses.
Your licenses should have been received already before beginning this step. If you don't have them, you will need to locate your Product Authorization Key (PAK - should have been received as part of your order fulfillment) and follow the instructions on the self-service licensing portal to obtain the license (.lic) file(s).
10-30-2014 08:33 PM
It appears you're running 9.1(1) and using Chrome. That was the first PRSM / CX release and very buggy. It has particularly a lot of issues rendering correctly in various browsers.
Please upgrade to the current release (9.3.x) and check again - that should help a lot.
Your port forwarding is a totally separate issue. Please start a new thread for that.
10-17-2014 03:20 PM
First you need to get the CX module running and accessible so that you can manage the Next Gen Firewall services (WSE, AVC and IPS). It's managed separately from the base ASA Follow the Quick Start Guide if you haven't done that yet.
Then log into PRSM (the GUI) and follow the User Guide section on Managing System Licenses.
Your licenses should have been received already before beginning this step. If you don't have them, you will need to locate your Product Authorization Key (PAK - should have been received as part of your order fulfillment) and follow the instructions on the self-service licensing portal to obtain the license (.lic) file(s).
10-27-2014 08:10 PM
Hello Marvin,
Thank you very much for the quick start up guide that you have provided it was all accurate and very helpful indeed.
However I did encounter some issue after loading the WSE and AVC.
Please refer to the attached screenshots for a detailed view of my issue.
CISCO PRIME SECURITY MANAGER
DASHBOARD
LICENSES SUCCESSFULLY LOADED
-APPLICATION VISIBILITY AND CONTROL
-WEB SECURITY ESSENTIALS
After installing the licenses, I checked the policies section but there’s no option to add a policy,
Even the Application section doesn’t have an option to add or a built in objects.
I tried adding an object to the object section but after adding, nothings change in the policies and application section.
After creating an object, no object was displayed on the object section. Based on what I’ve seen on some Quick reference guide & tutorials regarding Cisco Prime Security Manager, I should have an option on adding a Policy on the Policies>Policies section.
Question.
Lastly I did encounter some port forwarding issues
I tried adding a Port Forwarding rules via Public Servers module, after adding some rules I encountered an error stating that there’s a configuration overlap, but as seen on the screenshot below there are no existing configuration that might cause the conflict.
QUESTION:
Your assistance is greatly appreciated, Let me know if you have any questions.
10-30-2014 08:33 PM
It appears you're running 9.1(1) and using Chrome. That was the first PRSM / CX release and very buggy. It has particularly a lot of issues rendering correctly in various browsers.
Please upgrade to the current release (9.3.x) and check again - that should help a lot.
Your port forwarding is a totally separate issue. Please start a new thread for that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide