Configuring port triggering on the ASA 5505

[rchacon01]

Hello,

How do I configure port triggering on the ASA 5505 v8.2 required by the SIP provider. They are requireing the following ports be triggered:

UDP 5060-5090, 8000-8200, 16384-16482

[Pablo]

Hi,

Unfortunately Pre-8.3 code you can't create a port trigger for a range of ports, the only workaround available is to do a 1:1 NAT where you NAT all the "Outside IP" ports to a single host on the inside and the apply restrictions with an ACL. 

If you don't have any current "static" statements this might be a feasible solution for you.

HTH

__ __

Pablo