Configuring SNMP for Cisco Firepower 2110

[B A]

Hello.

I need to configure SNMP for Cisco Firepower 2110 to communicate with our Zabbix server.

How do I do this? I cannot find any way how to enter the Zabbix server's IP address to Cisco Firepower to make it working.

Thank you for your help.

[phil.hydea]

Hi

So it looks like both FTD devices can be polled successfully by Zabbix.

The FMC SNMP settings need to be configured under System > Configuration > SNMP.

Configure the SNMP parameters, save then test.

let me know how you get on.

Kind regards

Phil

[B A]

I can only set the SNMP version and the community string. Nothing else. I cannot specify the Zabbix server as an SNMP server for our FirePower.

After I set this up, still no joy.

[phil.hydea]

Still in the configuration area of the FMC, within Access List, put the Zabbix IP address in for SNMP. Save, then re-try.

[B A]

Thanks. That was it.

[kapydan88]

Hello.

What zabbix template was used for this device? 

[Marvin Rhoads]

You should be able to use the Cisco ASA template for Zabbix to monitor Cisco Firepower Threat Defense (FTD) devices.

[hagroot_cisco]

We do use that template , but i do see a lot of applications with the status "unsupported." Is that correct?
Im trying to monitor a vFTD 7.0.1 and a FTD 6.6 ( physical) , both managed by an FMC

[kapydan88]

Hello.

In our case template for ASA works correctly.

Also, you can try to use templates from screen - template net cisco ios snmpv2 we use for whole HA and template icmp ping we use to monitor device availability by management port.

[kapydan88]

Is it possible to monitor virtual FTDv 7.0.1 version managed by FDM through zabbix?

[hagroot_cisco]

I'm also looking forward to this answer!

[kapydan88]

Yes, its possible. But you should use flexconfig for this purpose.

[hagroot_cisco]

Thanks , do you have some links to more info?

[kapydan88]

try this method

https://www.ciscozine.com/configure-snmp-firepower-fdm/

[hagroot_cisco]

Thanks , but im using FMC , and i do have SNMPv2 enabled via the Platform Settings

[kapydan88]

Can you clarify your problem?

If i understood you correctly, you use FTD managed by FMC and you cant add this FTD into Zabbix?