Configuring snmpv3 in Cisco ASR-9001 Chassis, does this support snmp other versions ?

[sojujoseph1]

Dear all

I need help in configuring snmpd

Cisco ASR-9001 Chassis

Cisco ASR-9001 Chassis
System image file is "bootflash:disk0/asr9k-os-mbi-6.7.1/0x100000/mbiasr9k-rp.vm"

Thanks

[balaji.bandi]

as per the document they do support other version, what is the challenge you see here :

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-7/system-management/configuration/guide/b-system-management-cg-asr9000-67x/b-system-management-cg-asr9000-67x_chapter_0100.html#con_1048216

[sojujoseph1]

Cisco IOS XR Software: Cisco IOS XR Software provides comprehensive network security features, including access control lists (ACLs); control-plane protection; routing authentications; authentication, authorization, and accounting (AAA) and TACACS+; IP Security (IPsec); Secure Shell (SSH) Protocol; SNMPv3; and leading Routing Policy Language (RPL) support.

I doubt it supports other versions

https://www.spectra.com/wp-content/uploads/asr-9000-line-cards.pdf

I am tyring with below config..but not able to get it

snmp-server engineID remote x,x,x,x 0000000903003c13cce11fb0 udp-port 161
snmp-server host x.x.x.x traps version 2c viewnx2 udp-port 161
snmp-server host x.x.x.x traps version 2c viewnx2 udp-port 161
snmp-server user noauthuser snmpgroup v2c
snmp-server user writemanager writeuser v3 auth sha encrypted 11080C111F020A1F173D24362C626771
snmp-server view snmpview 1.3.6.1.2.1.1.5 included
snmp-server view configfile iso included
snmp-server view configfile cisco included
snmp-server view configfile mib-2 included
snmp-server view configfile system included
snmp-server community viewnx2 RW IPv4 viewnx3
snmp-server group snmpgroup v2c IPv4 snmpview
snmp-server group writeuser v3 auth write configfile
snmp-server traps otn
snmp-server traps syslog

[balaji.bandi]

Cisco IOS XR Software: Cisco IOS XR Software provides comprehensive network security features, including access control lists (ACLs); control-plane protection; routing authentications; authentication, authorization, and accounting (AAA) and TACACS+; IP Security (IPsec); Secure Shell (SSH) Protocol; SNMPv3; and leading Routing Policy Language (RPL) support.

As per my understanding that was more mentioned about security features

i am sure it should support other version of SNMP - try SNMPwalk and see what results you get out ?