Configuring Switch for CCA is behind non-Cisco phone, NAC OOB VGW Deployment

[Mike Masalla]

Hi,

I need to configure the edge switch port to keep serving non-Cisco IP phone on deploying NAC as OOB VGW.

I appreciate your advise, but make sure 802.1x solution as the last option.

Thanks

Mike

[Tiago Antunes]

Hi,

Please look at the config guide:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_oob.html.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.