06-17-2011 02:13 PM - edited 03-11-2019 01:46 PM
Hi expert ,
we are using ASA firewall.
we have opened access for one link from our inside network on port 80 in our firewall ,that application is accessable on port 80, previously it was working. But right now it is not working. when I check on firewall with show connection, connection is not establishing . we are getting flag as saA.
Pls help me to resolve this issue, its urget.
Thanks in Advance,
Regards,
Surya.
Solved! Go to Solution.
06-18-2011 03:45 AM
Hi Surya,
Can you try to run packet tracer an see how firewal reacts to the incoming traffic :
packet tracer input
--
Rahul
06-17-2011 09:36 PM
can you please elaborate a little more and if possible give us some idea of topology and config you have
06-18-2011 03:45 AM
Hi Surya,
Can you try to run packet tracer an see how firewal reacts to the incoming traffic :
packet tracer input
--
Rahul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide