Hi,
Having read the Active-Active configuration for context's it is still not clear to me. Here is what I understood please correct if I am wrong.
I have four different contexts and one admin context.
1. If I configure ASA - Unit-1 as an active device for context_1 and context_2. Obviously ASA Unit-2 is failover device for context_1 and context_2.
2. Next, I will configure ASA Unit-1 as a failover device for context_3 and context_4. Obviously ASA Unit-2 will be active for Coontext_3 and context_4.
3. So when, all is well tarffic for Context_1 and context_2 will be forwarded by Unit-1 and traffic for context_3 and context_4 will be forwarded by Unit-2.
4. When one unit fails due to some reason, second unit will be only device forwarding traffic for all the four contexts.
Please correct if I am wrong.
Share the experience.
Thanks in advance
subodh