03-24-2021 09:46 AM
Hi Community
I have been trying converter Cisco ASA 5516x to image FirePower 2210
Hardware: ASA5516, 8192 MB RAM, CPU Atom C2000 series 2416 MHz, 1 CPU (8 cores)
BIOS Flash M25P64 @ 0xfed01000, 16384KB
I followed the step but I received message that I don't have space in disk to install this package.
the first copy : ftd-boot-9.10.1.3.lfbff --ok
Second: ftd-6.3.0-83.pkg (no space)
Any clue?
thank you
Alex
Solved! Go to Solution.
03-24-2021 09:54 AM
You don't copy the pkg file onto the ASA disk0. It gets copied into the Firepower service module SSD once you have booted and bootstrapped the ftd-boot file.
03-24-2021 09:54 AM
You don't copy the pkg file onto the ASA disk0. It gets copied into the Firepower service module SSD once you have booted and bootstrapped the ftd-boot file.
03-25-2021 04:15 AM
Hi Marvin
Thank you for answering
I've done this procedure (https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200884-installing-and-upgrading-firepower-threa.html)
firepower-boot> system install scp://MYIP/ftd-6.3.0-83.pkg <-- that's pkg I used
But after extracting I received this error below in looping and I just stopped after I rebooted via power cable
DB error - will retry: Cannot connect to DB at /ngfw/usr/local/sf/lib/perl/5.10.1/SF/SFDBI.pm line 603.
Any thoughts?
Thank you
Alex Ribas
03-25-2021 09:52 AM
Sorry - I misread your original post. I see you are imaging to FTD, not ASA with Firepower service module.
Did you clean out the existing files on disk prior to starting the installation of the pkg file? This procedure advises you to do that:
Is there a reason why you are going with version 6.3? That's pretty old and the current recommended release would be 6.6.3.
03-25-2021 10:03 AM
Because I'm tryng register Cisco ASA 5516-x using the new version and I received message that just support the 6.3.x.
03-26-2021 06:56 AM - edited 03-26-2021 06:56 AM
hi,
see helpful link below in converting ASA to FTD.
i used ASA5515x and coverted to FTD.
https://ccnpsecuritywannabe.blogspot.com/2019/07/reimaging-cisco-asa-5500-x-to-firepower.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide