cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1557
Views
15
Helpful
5
Replies

After change mode single Firewall to mode multiple (no load anymore) Cisco ASA 5516-x

Alex Ribas
Level 1
Level 1

 

File: asa9-14-2-lfbff-k8.SPA

 

File system not supported
Attempt autoboot: "boot disk0:"
File system not supported
boot: cannot determine first file name on device "disk0:"
autoboot: All boot attempts have failed.
autoboot: Restarting the system.

 

 

3 Accepted Solutions

Accepted Solutions

Hmm did you save your boot image to boot a new 9.14?

how is is startup (asa power up logs shows)

please do not forget to rate.

View solution in original post

johnlloyd_13
Level 9
Level 9

hi,

did you try using a different image file? maybe the image file is corrupt.

try to 'tftpdnld' the image or boot from USB, do a 'format disk0:' and re-upload/upgrade again.

View solution in original post

@johnlloyds_13 I was thinking the same.

please do not forget to rate.

View solution in original post

5 Replies 5

Hmm did you save your boot image to boot a new 9.14?

how is is startup (asa power up logs shows)

please do not forget to rate.

johnlloyd_13
Level 9
Level 9

hi,

did you try using a different image file? maybe the image file is corrupt.

try to 'tftpdnld' the image or boot from USB, do a 'format disk0:' and re-upload/upgrade again.

@johnlloyds_13 I was thinking the same.

please do not forget to rate.

thank you guys

I tried different image and It's working now.

I appreciate your help.

Good man Alex never give up

please do not forget to rate.
Review Cisco Networking products for a $25 gift card