05-24-2005 01:46 PM - edited 02-21-2020 12:10 AM
Hi All,
The command 'copy flash: tftp' is not seen in ver 6.3(3) but is available in 7.0(1)
Version 6.3(3)
PIX# copy ?
Usage: copy capture:<capture-name> tftp://<location>/<pathname> [pcap]
copy http[s]://[<user>:<password>@]<location>[:<port>]/<pathname>
flash[:[image | pdm]]
copy tftp[:[[//location][/pathname]]] flash[:[image | pdm]]
Version 7.0(1)
--------------
PIX# copy ?
/noconfirm Do not prompt for confirmation
/pcap Raw packet capture dump
capture: Copyout capture buffer
flash: Copy from flash: file system
ftp: Copy from ftp: file system
http: Copy from http: file system
https: Copy from https: file system
running-config Copy from current system configuration
startup-config Copy from startup configuration
system: Copy from system: file system
tftp: Copy from tftp: file system
Can you point me to a document which says so.
Thanx
Praful
05-24-2005 05:56 PM
write net [
05-25-2005 01:38 AM
Hi,
the command write net is only for saving your configuration on TFTP server,not for saving of image.
The OS versions till 7.0 do not have any command for
saving of image.
HTH
Zdenek
05-25-2005 08:53 PM
misread the post. You cannot copy the flash image from the pix < 7.0.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide