Hello all,
Device: ASA5525
SW version: 9.2(3)
The Release Notes for 9.2(x) states that the ASA now supports the cpmCPUTotal5minRev OID.
The OID returns there values. What is the difference between .1, .2 and .3 below?
$ snmpwalk -v 1 -c XXXX 10.10.10.10 1.3.6.1.4.1.9.9.109.1.1.1.1.8
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.8.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.8.2 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.109.1.1.1.1.8.3 = Gauge32: 0
ciscoasa# show cpu usage
CPU utilization for 5 seconds = 0%; 1 minute: 0%; 5 minutes: 0%
----
Hardware: ASA5525, 8192 MB RAM, CPU Lynnfield 2393 MHz, 1 CPU (4 cores)
ASA: 4096 MB RAM, 1 CPU (1 core)
----
Thank you,