06-14-2023 04:50 AM
Hello,
We have a firewall cluster made up of Firepower hardware appliances, each simultaneously running a piece of ASA firmware and a piece of FxOS firmware. This deployment mode is Firepower "Appliance mode".
The cluster can communicate directly with the ASA layer, directly with the FxOS layer, or even indirectly with the ASA layer by first passing through the FxOS layer.
We want to retrieve the result of the sh failover command via an SSH connection with certificate authentication on the FxOS layer.
it's possible in this multiple-context environment, and if so, how to set up the SSH parameters on the FxOS layer, and if not, what the best practice is.
Thank you
06-21-2023 12:52 AM
06-21-2023 03:38 AM - edited 06-21-2023 03:40 AM
Hello,
Thank you for your reply.
In this case, how can I configure SSH authentication by certificate on the FxOS layer in multiple-context? Could I have the commands please?
06-21-2023 12:29 PM
As far as I know, FXOS only supports RADIUS, TACACS or LDAP for remote authentication.
06-21-2023 01:22 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide