06-29-2011 10:55 PM - edited 03-11-2019 01:53 PM
Hi All,
One of my client is having ASA 5510 with csc-ssm10. The total number of users 40 and maximum concurrent users are 30. But the csc is showing the no of node exceeding more than 100 which is having 100 node license. Anyone can help me out why it is showing like that and is there anyway to avoid this error.
Thanks & Regards
R.MADHANKUMAR
Solved! Go to Solution.
06-30-2011 12:17 AM
Hi,
Each IP address generating TCP traffic on one of the ASA interfaces except the lowest security one is considered as a node.
If you have for instance a DMZ, each hosts behind this interface will also be counted as nodes.
If you want to see which IP are using your nodes, you can log at Informational level and look for message 6-421005 in the logs.
It should give you something like this:
%ASA-6-421005: inside: 1.1.1.1 is counted as a user of Content Security and Control Card
Regards,
Nicolas
06-30-2011 12:17 AM
Hi,
Each IP address generating TCP traffic on one of the ASA interfaces except the lowest security one is considered as a node.
If you have for instance a DMZ, each hosts behind this interface will also be counted as nodes.
If you want to see which IP are using your nodes, you can log at Informational level and look for message 6-421005 in the logs.
It should give you something like this:
%ASA-6-421005: inside: 1.1.1.1 is counted as a user of Content Security and Control Card
Regards,
Nicolas
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: