03-12-2008 08:21 AM - edited 02-21-2020 01:56 AM
Hi,
As I knew when we discover devices, it will discover all the devices config and overide the previous copy in CSM DB. Can we SELECTIVELY choose only one device to be discovered ? Otherwise afer discovered we need to re-deploy all again.
Reason is 1 out of 4 firewall managed by CSM. The user access direct to firewall and perform configuration change directly at firewall. Therefore the CSM DB is not in sync with firewall. I just want to discover that unit of firewall.
Regards
03-18-2008 12:01 PM
I think this can be accomplished with help of objects, which can be set for induvidual devices. Check the URL http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/defapset.html#wpxref64945 for more information.
03-24-2008 05:35 PM
In device management, if you right click on the device, there should be an option for 'discover policies on device'. You'll have to re-assign any shared policies after discovery, however.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide