CSM 4.0.1 and EIGRP routing?

[jkeeffe]

I have EIGRP routing on several ASA firewalls on our enterprise network. When CSM pulls in the ASA configurations, I don't see EIGRP routing in the CSM application.

Under Policy Types, PIX/ASA/FWSM Platform, Routing, these are the choices:

  - No Proxy ARP

  - OSPF

  - RIP

  - Static Route

I'm using CSM 4.0.1 with a 90-day evaluation, but it is supposed to be a fully-functional CSM.

Does CSM 4.0.1 not support EIGRP?

[Panos Kampanakis]

Unfortunately CSM will not support EIGRP configurations.

A workaround could be Felx Configs.

I hope it helps.

PK

[Christopher.Hayre]

A feature enhancement request has been raised for this very item.  You can track the following Bug ID:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=csctj77824

In the meantime, FlexConfig is the way to go.

Thanks!

[ericlamer]

2.5 years later and still no support for eigrp in CSM 4.4

So far it seem that the software didnt improve much since the last 4 years.  There is a lot of features not supported and this software is develop by Cisco.  This is very disapointing.