Customized User in Cisco ASA 5505

[asadrizvi1]

How can i create customized user in Cisco ASA 5505 having the following Privileges? note i dont have AAA server.

User can only perfrom show runing, ping, traceroute, show xlate.

Second Question is, I have review one of the firewall configuration and found two type of password defined, what is the difference b/w enable and passwd?

Hostname# sh run

: Saved

:

ASA Version 8.3(2)

!

enable password bArLHu8lFMFwbla4xhjfhwtsjs22212223O3 encrypted

passwd Ev0teJfaKqnjU222shJT92FQ9xCZq encrypted

Regards,

[asadrizvi1]

would appriciate if any one respond on it.

Regards,

[Ryan Cigelske]

First question - create the user account with a priv of 5; you stated you don't have an aaa server... if you run the command: aaa authorization command LOCAL

That will solve that problem - to see the privileges of that user log into that account and run: sh curpriv

That will tell you what the current privileges are such as ping, traceroute, etc - and adjust as needed.

Second Question is, I have review one of the firewall configuration and found two type of password defined, what is the difference b/w enable and passwd -

enable password is to get into configuration mode

passwd is the console access password

Thanks,

Ryan