I have CW CSM deployed to manage the Pix and ASA firewalls deployed in the company. I have added the firewalls to AUS but some of them will not talk to the Update server. I have a dozen or so that will talk fine, get their updates and remain sync'd but the others do not appear to be contacting the AUS system.
I get an error on the firewalls of one of these two:
Jan 23 06:43:03 [x.x.x.x.2.2] <device name> %PIX-4-612003: Auto Update failed to contact: https://137.51.x.x/autoupdate/autoupdateservlet, reason: HTTP POST failed
OR
Jan 23 04:11:10 [x.x.x.x.2.2] <device anme> PIX-4-612003: Auto Update failed to contact: https://137.51.x.x/autoupdate/autoupdateservlet, reason: HTTP response failed
The firewall configuration is:
auto-update device-id ipaddress inside
auto-update server https://********@137.51.x.x/autoupdate/autoupdateservlet
I have searched through the forums, run the output through the error message decoder, and tried all I can think of with no success. I have reinstalled CSM and also reconfigured AUS with no improvements. Does anyone have any good (or even bad) ideas?
Thanks for the help,
Jerry