cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
839
Views
0
Helpful
5
Replies

DB error for NAC Profiler

shairolbit
Level 1
Level 1

hi all,

This first time i touch nac appliance so i need guide from you all.

1- DB error Profiler using version 2.1.8.37 factory default version .

.2- Try access using GUI https://ip_profiler and appear DB error .

4- Profiler  license for HA .

5- this DB error appear at second for primary profiler not ready configure.

1 Accepted Solution

Accepted Solutions

Tiago Antunes
Cisco Employee
Cisco Employee

Hi,

Do you get this messages after login?

If yes, then I would do the following:

1 - Do the GUI password recovery and try to login with the new account: https://supportforums.cisco.com/message/3204663#3204663.

2 - If the new user still gets the same problem, you can go deep troubleshooting or simply re-image the box...if you have not configured nothing yet...i would simply reimage the Profiler and consider using the 3.1.x version which is much more user friendly.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

View solution in original post

5 Replies 5

Tiago Antunes
Cisco Employee
Cisco Employee

Hi,

Do you get this messages after login?

If yes, then I would do the following:

1 - Do the GUI password recovery and try to login with the new account: https://supportforums.cisco.com/message/3204663#3204663.

2 - If the new user still gets the same problem, you can go deep troubleshooting or simply re-image the box...if you have not configured nothing yet...i would simply reimage the Profiler and consider using the 3.1.x version which is much more user friendly.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

hi ,

Now my problem for DB error solve but i have another problem

1- needed upgrade version profiler 2.x.x to the latest version 3.x..x .My problem is when using putty.exe or winscp328.exe  to access the profiler using ssh ,failed access to profiler .

2-Reset configuration and change the new username & password but still same can't log in using putty or winscp328 but successful using https://ip_profiler

3- here  my step reconfigure factory for profiler .

1-/root/.resetProfiler factory

2-reconfigure all database profiler

Changing the beacon and root system user account password

1-passwd beacon  -change the beacon password (cisco123)

2- Passwd root  - change the root password (cisco123)

any idea ?

Are you trying to login to the Profiler via SSH as the beacon user?

shairolbit
Level 1
Level 1

hi ,

1-upgrade version profiler 3.1.x.x .ISO file boot from CD.

2-after completed upgrade version i can access using https,

3-but when i try access using putty or winscp prompt error " Using Keyboard -interactive  authenticate "

4-tired type username & password but still can't access

5-i try change the new username and password but still can't access

any idea ?

Hello,

You can't login to the profiler using the root user. You have to login as beacon, issue the "su" command, and then put in the root password to make yourself root.

HTH,

Faisal

--

If you find this post helpful, please rate so others can find the answer easily

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: