We have a remote 1811 router which has zone based in it. We want to check if zone based configuring is doing any check on applications & if so, which all applications.is there any command to identify that.TIA
Hi Guys,I'm trying to configure SNMP V3 authpriv on a switch 2960 (12.2.53) to send mac notifications to a NAC Access Manager. But when "priv" is enabled on NAM, and a host is connected to a controlled OOB port, NAM does not change the port vlan to t...
Dear all.I have the following situation for which i appreciated some assistance...Inside a host 10.81.34.55inside interface 10.81.34.80using a VPN connection sessions from the datacenter (AMS) are setup to the 10.81.34.55 hosts (INDIA).These sessions...
I am have a problem with policy nat on an ASA 5510. The customer has supplied me with the following conditions but so far I have been unable to get it to work.pleas see the attached pdf document. for diagramAll of the 10.1.1.0/24 network hides behind...
Cisco NAC agent v4.7.3.2 on Windows 7 not able to login. I get the following error "Agent user operating system is not supported". Have tried diffrent versions, all giving same error.
Hi,I am studing the VPN; I want to know why I need to create the Tunnel in VPN? cos I have physcial interface on my ROuter or Firewall.?Any Benift of that??
I'm running 8.3 on my ASA. If I do a 'show xlate', I have an idle parameter and a timeout parameter. Can anyone tell me what these mean, eg:FW#sh xlate1439 in use, 3223 most usedFlags: D - DNS, i - dynamic, r - portmap, s - static, I - identity, T - ...
I am doing some testing and would like to get the following to work.1. E0 - Outside - ISP: 172.16.2.1 255.255.255.252 ISP Gateway: 172.16.2.2 255.255.255.2522. E1 - Inside - IP: 192.168.100.50 255.255.255.03. E2 - DMZ IP: 192....
Dear Fellows @ Cisco Support CommunityI'm writing this because I'm not sure where or what to do next. Here's what happened:We bought a Cisco ASA 5510 device with SmartNet.After several weeks, we received a note from the reseller with some information...
Hi, Running V8.2.(2) on an ASA5520 and I'm trying to configure dhcp servers on vlans.Is this actually possible or am I just misreading the Command Reference ?I can configure the VLANs sub-interfaces fine (IP address, netmask, vlanid, nameif, ...
Hi folks,Is the Cisco 1811 router built-in firewall able to handle URLs?Otherwise, how do you guys allow your hosts to download security updates from windowsupdate.microsoft.com?Please let me know.Thanks,...Alex
Hello,I am configuring the OOB logoff feature but it is not working. I followed the instruction from the configuration guide. Maybe I miss something?thank you and best regards.
I'm trying to install an 871 router and having an issue with the zone based firewall. It's by default, it's denying smtp port 25 but allowing me out to the internet.The only way I'm able to get email to work and also get internet to work is to apply ...
