cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
1
Replies

Dedicated gateway for certain protocol

Mikael Sveden
Level 1
Level 1

Hi all,

I have two pix with a tunnel between them and both have full access to outside. As it is today all local networks use the local pix to get access to outside. What I would like to do is to route all outgoing traffic for one port via a dedicated gateway.

E. g. all http traffic should always go out via pix1 even if the local network is behind pix2.

Is this possible?

Regards Mikael

1 Reply 1

integreon
Level 1
Level 1

Hi Mikael,

No, it is not possible. Are you trying to route your mail / specific production traffic through PIX2 and internet through PIX1? If yes, you can add routes on your PIX2 to route mailserver and production traffic through PIX2 outside and the 0 0 to PIX1.

Regards,

Anton

Review Cisco Networking for a $25 gift card