07-09-2014 09:33 AM - edited 03-12-2019 05:34 AM
I am receiving the following health alerts continuously on my Sourcefire Defense Center running software version 5.2. How can I stop this alert?
URL filtering download failure
Solved! Go to Solution.
03-11-2016 06:51 AM
I have the same error and TAC hasn't figure why the downloading is having an error. This seems like a problem that would come from a $200 dollar device without a good manufacture. This is the first I've experience this type of service from an Cisco device.
07-09-2014 09:41 AM
This issue may occur on a Sourcefire appliance after the URL filtering license is removed or expired. It affects all appliances running software version 5.2.x.
This issue is resolved in software version 5.3.0. Please update the software version of your Sourcefire appliance to 5.3.0 or greater to resolve this issue.
10-06-2015 08:54 AM
Well the issue is back on 5.4.1.2, and TAC has no answer. If anyone ever had this and figured out what it may be, please let me know.
Thanks
Tomasz
10-06-2015 06:19 PM
I have same issue with Same version 5.4.1.2 . Module URL Filtering Monitor: URL Filtering download failure . Any update from Cisco TAC ?..
10-08-2015 05:01 AM
I have same issue with version 5.3.1.5 URL Filtering download failure any updates??
12-20-2015 02:34 PM
I got the same URL Filtering download failure on a version 6.0.0 (build 1005).
Something new about this issue?
01-07-2016 06:00 AM
URL filtering download failures can be due to a variety of reasons: connectivity, packet malformation along the path, etc.. Please open a TAC case so that they can review your logs to identify why the download failed and provide you with a solution
03-11-2016 06:51 AM
I have the same error and TAC hasn't figure why the downloading is having an error. This seems like a problem that would come from a $200 dollar device without a good manufacture. This is the first I've experience this type of service from an Cisco device.
03-14-2016 02:48 AM
Hi kpendleton
After establishing a scheduled (daily) update the FireSight got the correct URL updated. This is still version 6.0.
Afterwards I've updated with patch 6.0.0.1 and the update runs correctly.
08-29-2016 07:57 AM
where can i set it for Daily Download?
At "Updates\Rule Updates"?
When i watch here
hhttp://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/117956-technote-sourcefire-00.html
I just found places to activate not to set a schedule...
08-30-2016 01:06 AM
08-30-2016 07:54 AM
Hm.. I configured this, but no rules are downloaded...
I try the 4 steps of Cloud Connectivity Issues, at:
http://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118852-technote-firesight-00.html
everything ok, but I still get:
and Syslogs say:
Aug 30 2016 16:05:18 IRSFIREPOWER SF-IMS[18786]: [18790] CloudAgent:cloud_config [INFO] Peer with active URLFiltering: eea1c65c-644b-11e6-a895-f5552129ae4f
When I watch at: /var/sf/cloud_download
an wenn I search for bdcb or .bin files i dont found anything...
(???)
08-31-2016 04:31 PM
i had same as your issue , but i found out that i add the IP of the FirePOWER under one of my rules that dont allow him to get updates . so i allowed him for all and that ssolved the issue for me.
Note : i had other issues with FireSIGHT Virtual Appliance it self and solved it by redeploy new one.
09-01-2016 05:54 AM
The System is just a testsystem so far, ich wanted to set it productive these days, when i put all settings to any-any then i got no Download, too... :-(
09-01-2016 04:39 PM
you should check if you have proxy in ur network , if you have one you should configure the firepower for it , if not then you should contact your reseller or cisco TACto help out in this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide