Deprecated command from ASA Version 8.2 (5) to Version 9.2 (2) 4

[Asmael_zal]

Hello,

I´m new to Firewalling

I´m configuring the new ASA 5515-X version 9.2 (2) 4 using the configuration that is running in the ASA 5510 version 8.2 (5)

I have the trouble with some commands such as NAT and and others witch is giving, (ERROR: This syntax of nat command has been deprecated).

nat (inside) 0 access-list inside_nat0_outbound

nat (inside) 1 access-list nat

nat (full_access) 1 access-list full_access_nat_outbound

static (inside,outiside) tcp interface pptp 10.252.2.9 pptp netmask 255.255.255.255

Would you help please with the Migrated command above?

Thanks!

[Philip D'Ath]

If you upgrade your 5510 to asa917-21-k8.bin first it will migrate the config for you.  Note you would probably do this right before cut over as the 5510 may need more RAM in it than it currently has to be able to run stably in a production environment.

[Asmael_zal]

Hi Philip,

My goal is to configure the ASA 5515 versio 9.2 (2) 4 by using the configuration that come from ASA 5510 version 8.2 (5) that is already in production.