01-25-2018 01:19 AM - edited 02-21-2020 07:12 AM
Hello,
I´m new to Firewalling
I´m configuring the new ASA 5515-X version 9.2 (2) 4 using the configuration that is running in the ASA 5510 version 8.2 (5)
I have the trouble with some commands such as NAT and and others witch is giving, (ERROR: This syntax of nat command has been deprecated).
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 access-list nat
nat (full_access) 1 access-list full_access_nat_outbound
static (inside,outiside) tcp interface pptp 10.252.2.9 pptp netmask 255.255.255.255
Would you help please with the Migrated command above?
Thanks!
01-25-2018 01:55 AM
If you upgrade your 5510 to asa917-21-k8.bin first it will migrate the config for you. Note you would probably do this right before cut over as the 5510 may need more RAM in it than it currently has to be able to run stably in a production environment.
01-25-2018 04:13 AM
Hi Philip,
My goal is to configure the ASA 5515 versio 9.2 (2) 4 by using the configuration that come from ASA 5510 version 8.2 (5) that is already in production.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide