06-09-2010 04:42 AM - edited 03-10-2019 05:01 AM
How to display the status of the power supply on the IPS 4270
since the IPS has two power supplies and one has failed, so i want to check what is causing this failure (i am looking for a message from the CLI describing that the IPS power were failed).
06-09-2010 04:58 AM
At this time, there is no method to display the status of the power supply from the CLI or IDM GUI of the IPS-4270. There is an open enhancement request to have this capability added in a future release of the IPS software.
Scott
06-09-2010 05:04 AM
Thank you,
do you know how to get this informations on the ASA; since i have a power failure on the ASA also.
06-09-2010 05:23 AM
Depending on the platform/software version, you may be able to find the details in the output of "show environment".
Scott
06-09-2010 06:13 AM
Thank u a lot
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide