03-25-2013 12:38 PM - edited 03-11-2019 06:19 PM
If you look at the data sheet for the 5512-X the High Availability section states "Not Supported; Active\Active or Active\Standby" while the ASA 5515-X states "Active\Active or Active\Standby". What does "Not Supported" mean for the ASA 5512-X? Does this mean HA does not work, or that I need to purchase an additional license to use the HA feature?
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/data_sheet_c78-701253.html
Thanks
Solved! Go to Solution.
03-25-2013 12:44 PM
Hi,
The Configuration Guide for 8.4 / 8.6 lists the following under the Licensing Requirements for Active/Standby Failover
Licensing Requirements for Active/Standby Failover
The following table shows the licensing requirements for this feature:
Model | License Requirement |
---|---|
ASA 5505 | Security Plus License. (Stateful failover is not supported). |
ASA 5510, ASA 5512-X | Security Plus License. |
All other models | Base License. |
Source:
For the Active/Active
Licensing Requirements for Active/Active Failover
The following table shows the licensing requirements for this feature:
Model | License Requirement |
---|---|
ASA 5505 | No support. |
ASA 5510, ASA 5512-X | Security Plus License. |
All other models | Base License. |
Source (Same document)
I think the table in the document you refer to means that the Base License does not support it but the Security Plus License enabled the use of both Active/Standby and Active/Active.
- Jouni
03-25-2013 12:44 PM
Hi,
The Configuration Guide for 8.4 / 8.6 lists the following under the Licensing Requirements for Active/Standby Failover
Licensing Requirements for Active/Standby Failover
The following table shows the licensing requirements for this feature:
Model | License Requirement |
---|---|
ASA 5505 | Security Plus License. (Stateful failover is not supported). |
ASA 5510, ASA 5512-X | Security Plus License. |
All other models | Base License. |
Source:
For the Active/Active
Licensing Requirements for Active/Active Failover
The following table shows the licensing requirements for this feature:
Model | License Requirement |
---|---|
ASA 5505 | No support. |
ASA 5510, ASA 5512-X | Security Plus License. |
All other models | Base License. |
Source (Same document)
I think the table in the document you refer to means that the Base License does not support it but the Security Plus License enabled the use of both Active/Standby and Active/Active.
- Jouni
03-25-2013 12:49 PM
Wow thanks a lot for the fast reply. I was unable to find any bundles for this unit, so I assume the sec plus license (ASA5512-SEC-PL) must be purchased individually, for both units? Do you know of a bundle and if it exists does it come with both units or do I have to buy the bundle for each unit?
03-25-2013 01:04 PM
Hi,
I checked a list I recently received from our provider and I can only see the the Security Plus License for ASA 5512-X listed separetely while for ASA5510 for example I can see a bundle with both ASA and Sec Plus license.
I cant give you 100% answer but according to the excel listing I got there would be no bundle which I guess would mean that you would have to get them all separately.
I guess it would be best to confirm this directly with the seller.
- Jouni
03-05-2015 01:58 PM
A client requested us to replace its 5510 for 5512 in HA scheme, so we need only one L-ASA5512-SEC-PL? need two?
04-17-2013 07:09 AM
Whilst looking into the same issue, having found I needed to buy a SecPlus license for a pair of 5512-X firewalls recently, I can find no other SecPlus license on the Cisco price list for the "X" firewalls..
I am assuming now that any platform above 5512-X comes with the license installed based on the lack of a part number/price and the fact there is a lack of a "not supported" listing in the features on your linked page.
Can anybody confirm 100% if this assumption is correct?
Sent from Cisco Technical Support iPad App
04-17-2013 07:24 AM
Hi,
If I remember correctly the original ASA5500 series only had Sec Plus license for ASA5505 and ASA5510 and others didnt require any separate license to provide the capabilities that those licenses gave.
On the basis of that it would seem to me logical that the ASA5500-X series would follow the same pattern.
But again, I cant say this with 100% certainty.
- Jouni
07-23-2013 02:55 AM
I also have some questions,
I want to know if I have order the ASA5512 with no security plus license. can I only order the specific license to upgrade supporting the HA feature? which specific SKU should I order?
07-23-2013 06:54 AM
You can order the 5512X on it's own or with as well as the Sec-Plus License. Cisco have not got around to bundling the 5512X & SecPlus license yet. They have announced EOL/EOS on the 5510 so I do not think it will be long.
Without the Sec Plus License, you cannot run high avaialability (Active/Active or Active/Standby).
The part numbers are:
ASA5512-K9 | ASA 5512-X with SW, 6GE Data, 1GE Mgmt, AC, 3DES/AES |
L-ASA5512-SEC-PL= | ASA 5512-X Sec. Plus Lic. w/ HA, Sec Ctxt, more VLAN + Conns |
Hope this helps.
07-23-2013 07:05 PM
Thank you very much
03-20-2014 08:50 AM
is this part number L-ASA5512-SEC-PL= the same for the 5515-X
if not, can you guys assis on looking for this part number?
04-21-2015 02:06 AM
You need ASA5512-SEC-PL license.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide