Dual ISP - ASA505 0.0.0.0 route

[roger perkin]

I am setting up an ASA550 ver 7.2(3) - does this need upgrading?

I have my ISP interfaces setup as primary and backup

I have a static route pointing out:

route primary 0.0.0.0 0.0.0.0 1.2.3.4 1

Question:

Do I put the next static route to be

route secondary 0.0.0.0 0.0.0.0 3.4.5.6 254

Will this set a high metric on the secondary route that will only take effect if the primary route is down?

I also need some help on the NAT's as I asssume I will need to have 2 sets of NAT rules to accomodate the dual ISP's

Thanks

Roger

[Jennifer Halim]

You can't have 2 ISP/default gateways configured on ASA pointing towards 2 different interfaces. This is not a supported feature.

However, if you would like to configure backup ISP for your "secondary" interface, then here is a configuration guide:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

Hope that helps.