02-20-2024 07:31 AM
I have firewall FPR 3110 with ASA 9.17, but when I try to do a commit buffer in FXOS mode, a error apear: Error: commit disabled while in appliance mode cisco asa. How can I solve this problem to enable the OIDs to monitor chassis characteristics and status?
02-20-2024 08:05 AM
In appliance mode you need to use ASA IP and OIDs exposed by "show snmp oid".
02-21-2024 10:39 PM
How can I disable appliance mode in my case?
02-21-2024 11:58 PM
You cannot. Firepower 3100 supports appliance mode only.
02-26-2024 01:40 AM
In admin context, is it possible to enable FXOS oids? I have read in the configuration guide that for firewalll 3100, snmpwalk commands polls FXOS mibs only from admin context (CLI Book 1: Cisco Secure Firewall ASA Series General Operations CLI Configuration Guide, 9.19)
02-26-2024 06:45 AM
No, everything is preconfigured. There are few MIBs with the information previously accessible from FXOS, which were ported to ASA. Others were not ported.
IF-MIB
ENTITY
CISCO-ENTITY-SENSOR-EXT-MIB
ENTITY-SENSOR MIB
Use "show snmp oid" for supported OIDs and this link: https://github.com/cisco/cisco-mibs/blob/main/supportlists/asa/asa-supportlist.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide