Enabling Firewall to send Logging information

[Janardhan Meesala]

Dear Experts!!!!

I have a ASA 5510 firewall with CSC module and Security Plus license for CSC module.

Will you tell me how to configure my firewall to send emails to particular mail ID when someone login into the firewall or any virus attacks from outside.

Please give me what are all the possible options to configure this.

Regards,

Janardhan

[varrao]

Hi Janardan,

Please have a look at the logging document below:

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml

You can select the syslog level to for user login and attacks, so that only those messages are sent to the mail server:

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml

Hope this helps.

Thanks,

Varun

[Janardhan Meesala]

Hi Varun,

Which Mail Id i need to configure From mail ID.

**

Is there any possibility to configure the same without SMTP server.?????

Regards,

Janardhan

On Fri, Jun 24, 2011 at 11:08 AM, varrao <

[varrao]

Hi Janardhan,

You may usne your company mail id and the smtp server ip address there.

Varun

[Janardhan Meesala]

Hi Varun,

Is we need both SMTP and SNMP servers neccessarily??????

Or SMTP server is enough???

Regards,

Janardhan

[varrao · Accepted solution]

Hi Janardhan,

You need just the smtp server, for snmp server there is a different configuration, snmp is a reporting and mionitoring tool.

Varun

[Janardhan Meesala]

Hi Varun,

Thanks for your info....