04-10-2015 01:31 AM - edited 03-11-2019 10:45 PM
Hello,
I am having difficulty in removing static routes from my ASA5525x, hoping someone here may be able to help.
Example:
ASA5525X/pri/act# sh route | in 192.168
S 192.168.60.0 255.255.255.0 [1/0] via 64.57.xxx.xx, OUTSIDE
ATLCOLO-ASA5525X/pri/act(config)# no route OUTSIDE 192.168.60.0 255.255.255.0 64.57.xxx.xx
%No matching route to delete
There are several which need to be removed, all 192.168.x.x/24, pointing to the Outside interface using the same address 64.57.xxx.xx
Solved! Go to Solution.
04-10-2015 05:09 AM
Just a thought but do you actually see that route in your configuration ?
If not do you have any VPN connections to your firewall and if so are you use RRI (Reverse Route Injection) to add routes to the routing table.
Jon
04-10-2015 05:09 AM
Just a thought but do you actually see that route in your configuration ?
If not do you have any VPN connections to your firewall and if so are you use RRI (Reverse Route Injection) to add routes to the routing table.
Jon
04-15-2015 01:31 AM
Hi,
I think i agree with Jon that this is probably due to RRI from the VPN configuration.
Also , check this output:-
show asp table routing and see if you see it in here as well.
We also have some defects so please provide the relevant interface and routing configuration and also the ASA code version.
Thanks and Regards,
Vibhor Amrodia
04-10-2015 06:57 AM
hi,
make sure you're on the correct security context.
issue a show run route instead and do a 'no route' on the unwanted static routes afterwards.
04-15-2015 02:34 AM
Thanks Jon, RRI was the culprit.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide