09-22-2011 12:20 PM - edited 03-11-2019 02:28 PM
I have a ASA 5500 series and im attempting to learn the ASDM client.
Scenrio:
I have an external IP, lets call it: 150.1.1.100
I want to forward to an internal IP of: 192.168.1. 20
Ive been trying to find a video or a good article on something dealing with this as I am pretty confused so far by the lingo associtated in creating this. I am using the ASDM 6.1 client for PIX.
Any help would be much appreciated. (If this is in the wrong forum area please move)
Thanks,
V
09-22-2011 12:33 PM
Hi,
I cannot show you the CLI configuration here, but on the cli, you would need the command to be:
static (inside,outside) 150.1.1.100 192.168.1. 20
Here's the ASDM guide as well, if you want to learn it:
http://www.cisco.com/en/US/docs/security/asdm/6_1/user/guide/nat.html#wp1055340
Hope this answers your question.
Thanks,
Varun
09-22-2011 12:34 PM
On the CLI that would be -
static (inside,outside 150.1.1.100 192.168.1.20
for ASDM see this link -
http://www.cisco.com/en/US/customer/docs/security/asa/asa80/asdm60/user/guide/nat.html#wp1072634
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide