FirePOWER on Fresh Image of ASA5516

[RBenke]

I'm installing a fresh image on an ASA5516.

I have the ASA software installed and running (asa984-26-lfbff-k8.SPA).

I have the FirePOWER image file installed (asasfr-5500x-boot-6.4.0-1.img)

I'm trying to install the FirePOWER software package (asasfr-sys-6.4.0-102.pkg)

I'm using this command line: system install ftp://198.165.8.9/asasr-sys-6.4.0-102.pkg

I'm getting this error: 

Verifying...

111

Upgrade aborted

Answers to obvious questions:

1) Am I connected to the MGT interface? Yes

2) Can the MGT interface ping 198.165.8.9 (my FTP server)? Yes

3) Does it make a difference if I include a username and password in the command line? No. Exact same result. Shouldn't be necessary anyway.

From what I've derived from online research, error 111 seems to indicate a version mismatch between the IMG and PKG files, but if that's the case, I'm clueless why I'm mismatched. They're both 6.4.0 and I downloaded them from the same page on Cisco's website.

Thoughts?

[Ruben Cocheno]

@RBenke 

Check the checksum of the files, and copy them using SCP, had issues in the past using FTP due the size of the files.

[RBenke · Accepted solution]

Never mind. I switched from the Solarwinds FTP server to FileZilla and got the install working on the first attempt. <shrug>