07-05-2018 01:53 PM - edited 02-21-2020 07:57 AM
I have a firepower sensor in a ASA 5585X that I upgraded from 6.2.3 to 6.2.3.2 from my FMC 1500
Upon completion, I got a message saying the data plane interfaces were not receiving traffic. I SSH'd into the sensor and saw that this was indeed the case --both interfaces were not receiving traffic.
This sensor has been up for a while, and nothing changed with my SFR policy on the firewall
If I do a "show module 1" from the firewall, it shows the sensor as unresponsive
I tried a reboot of the sensor of the sensor, but it didn't fix the issue
has anyone seen this?
(P.S. I've had a terrible time with this product in general, especially with upgrades. I've lost many sensors, suffered DB corruption, catastrophic bugs, and general instability)
Solved! Go to Solution.
07-05-2018 07:47 PM
07-05-2018 07:47 PM
07-05-2018 08:20 PM
I discovered that you have to be at 9.9.x code for the sensor to operate with 6.2.3.2 code
My firewall was still at 9.6.3
Once I upgraded the ASA, it came right back up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide