Fmc integration with Cisco Security Cloud

[Vishal6]

Hi All,

Can i integrate my Fmc running 7.4.2 with Cisco Security Cloud. Also if i do, is it any impact in running production. 

[Marvin Rhoads]

Yes you can. It will not affect the running config of any managed device.

[Vishal6]

Hi Marvin,

Thank you for response. However as per document it says Fmc would be 7.6.0 for integration with Cisco security Cloud. PFB link

https://www.cisco.com/c/en/us/td/docs/security/cdo/managing-fmc-with-cdo/managing-fmc-with-cisco-defense-orchestrator/m-onboard-devices-and-services.html#task_yg5_srj_gcc

[Marvin Rhoads]

The direct integration from the FMC GUI requires FMC 7.6.

However you can onboard your FMC 7.2-7.4.x using step 1 from that document:

In your on-premises management center, perform the following:

• For on-premises management center version between 7.2 and 7.4.x, go to Integration > SecureX.

• For on-premises management center version 7.6 or later, go to Integration > Cisco Security Cloud.

(The SecureX Integration step will redirect to Security Cloud Control automatically.)

[Vishal6]

Secure x discontinue from cisco if i'm not wrong ?

[Marvin Rhoads]

Correct SecureX is discontinued. But the Cisco Security Cloud onboarding process for FMC 7.2-7.4.x uses the code that was built for SecureX along with https redirect to accomplish the integration.

[Vishal6]

Thank you. Does Cloud deliver Fmc supports migration of onprem Fmc running version 7.4.x

[Marvin Rhoads]

Yes it does but that requires a cdFMC license.

cdFMC migration is not the same thing as integrating your on-premises FMC with Cisco Security Cloud Control.