05-13-2024 06:46 AM
I have an FTD device that is managed through FMC and working properly.
I'm trying to log in to the console port as "admin" but the passwords we use here are not working.
the default Admin123 also does not work.
is there any direction someone can point me to figure out what the reason is, or how to recover?
the device works fine and is not having any management issues, but if I need the CLI for some reason, it would be good to know the admin password.
Solved! Go to Solution.
05-14-2024 07:05 AM
If you have working FMC-based management, you could add external authentication (RADIUS), making sure to select to use it for ssh access. Then an externally-authenticated account with admin access could log in and change the local admin password.
05-13-2024 10:49 AM
Hope you have not setup AAA
then you may try reset as below guide :
05-13-2024 10:59 AM
For FTD devices run on Firepower 1000/2100/3100, you must reimage the device. See the Cisco FXOS Troubleshooting Guide for the Firepower 1000/2100 Series Running Firepower Threat Defense for the Reimage Procedure on these platforms.
That's not doable. I'll have to live without CLI/Console access if that's the case. the device is in production.
05-14-2024 07:05 AM
If you have working FMC-based management, you could add external authentication (RADIUS), making sure to select to use it for ssh access. Then an externally-authenticated account with admin access could log in and change the local admin password.
05-14-2024 07:24 AM
Thanks Marvin,
I'll give that a shot. I can build a Radius server in the environment.
a little less intrusive than a reimage
05-14-2024 07:29 AM
Add to that you can not access via SSH using local username/password as I know.
You need external server for any access via SSH.
What make me more sure a point this point in fmc platform you can config ssh port and ip can access via ssh but not password.
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide