cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2205
Views
0
Helpful
2
Replies

FPR 1010 connected client not getting DNS

mickyq
Beginner
Beginner

out of the box setup using FDM and the client device or the management device dont get DNS.

manually enter a DNS IP in the client NIC properties and DNS lookups work. I can browse the internet. The same applies for the device on the management port.

how does the client get DNS settings. DHCP works ok but no DNS settings pulled through to client device.

 

thanks

 

2 Replies 2

mickyq
Beginner
Beginner

Found the problem.

Go into DHCP>Configuration and either add some DNS IP's or hit the use opendns button.

why is there a DNS server config if it does not get used?

Ruben Cocheno
Spotlight
Spotlight

@mickyq 

 

By default could have the DNS servers setup, but unfortunately is not the case.

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: