FPR 1010 Management port settings

[Lee Dress]

I'm using an FPR 1010 as a firewall for an HTTPS server. 

I have successfully Nat'd the port and the HTTPS server is working.

problem is now I can't get to the management page of the firewall. 

on the old ASA's you could specify the port you wanted to use for ASDM.

is there a way to change the FDM port?

Thanks

[Rob Ingram]

Hi @Lee Dress 

You can do this from FTD 6.7

https://www.cisco.com/c/en/us/td/docs/security/firepower/670/relnotes/firepower-release-notes-670/m_features_functionality.html

You can change the HTTPS port used for FDM or FTD API access on data interfaces. By changing the port from the default 443, you can avoid conflict between management access and other features, such as remote access VPN, configured on the same data interface. Note that you cannot change the management access HTTPS port on the management interface.

HTH

[Lee Dress]

Thanks.

I just got to 6.6.1

I guess I'm going to 6.7!

Thanks for the quick response..