FTD Anyconnect Client

[JASON BOYERS]

Is there a minimum version level required for the Anyconnect client beyond it being a 4.x version when connecting to the FTD 2100?  I've looked at the AC compatibility guide, but it only lists ASA versions.

[Juaguerr · Accepted solution]

Hi j.boyers

The version supported on the FP2100 with FTD 6.2.1 is AC 4.0 + . So basically any 4.x version.

You can find the info here

https://www.cisco.com/c/en/us/td/docs/security/firepower/compatibility/firepower-compatibility.html

Firepower System Version	Cisco Firepower System User Agent	Cisco AMP Threat Grid	Cisco Terminal Services (TS) Agent	Cisco AnyConnect Secure Mobility Client	Cisco Identity Services Engine (ISE)
					ISE	ISE-PIC
5.3.x	2.2 +	—	—	—	—	—
5.4.x	2.2 +	—	—	—	—	—
6.0.x.x	2.3 +	1.4.2 +	—	—	1.3	—
6.1.x.x	2.3 +	1.4.2 +	—	—	1.3 2.0 and 2.0.1 2.1	—
6.2.0.x	2.3 +	1.4.2 +	1.0	—	1.3 2.0 and 2.0.1 2.1	—
6.2.1	2.3 +	2.1.4 +	1.0	4.0 +	2.0 and 2.0.1 2.1	2.2

[JASON BOYERS]

Thanks!  Didn't see that when I was looking.