09-22-2019 11:13 PM - edited 02-21-2020 09:30 AM
Hi all,
Hope you all are doing good.
Please help me on below.
We have two FTD 9300 installed in our setup in active standby.
Yesterday there was a failover we want to lnow why failover happend and when.
Is it possible to find it from FMC ? If so then how ?
Or if its possible from FTD please let me know how ?
Thanks
Solved! Go to Solution.
09-23-2019 02:43 AM
09-23-2019 02:43 AM
The best place is from the FTD cli:
show failover history
10-24-2019 02:41 AM
Hi Mervin, Thanks for your response.
Actually in our setup both IPS are standalone no HA.
For one instance IPS A would be Active and B would be Standby
and for second instance IPS B would be Active and A would be standby
in such case how to find out when and why instance one traffic moved form IPS A to B
Regards
Sajid Baig
10-24-2019 09:04 AM
If you are not using High Availability (HA), how does your design designate one unit as Active and the other as Standby?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide