09-02-2020 05:14 AM
Hi
So FTD HA pair, presently port-channel from FTD-1 to Switch stack as per attached diagram, is the correct way now to add another port-channel on the Switch Stack for redundancy, so FTD-2 to Switch Stack on seperate Port-channel and make sure all Vlans allowed on both Port-channels.????
Thanks
Solved! Go to Solution.
09-02-2020 05:54 AM - edited 09-02-2020 06:21 AM
Hi,
Cable the 2nd FTD to both switches, on the switch you would configure a second etherchannel, one for each FTD.
Check out figure 2 in this link
HTH
09-02-2020 12:03 PM
Thanks Rob great advise as always
09-02-2020 05:54 AM - edited 09-02-2020 06:21 AM
Hi,
Cable the 2nd FTD to both switches, on the switch you would configure a second etherchannel, one for each FTD.
Check out figure 2 in this link
HTH
09-02-2020 12:03 PM
Thanks Rob great advise as always
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide