06-04-2020 01:58 PM
Hi,
I have two FTD 2120 appliances each with a single interface to the inside and outside. Is it possible when I make them a HA pair to configure each one fo the single interfaces into a port channel?
Solved! Go to Solution.
06-04-2020 03:16 PM
What is the use case here, putting a single Link to port-channel? that is not going to meet the design goals.
You can not mix 2 devices into one port-channel that is not supported as per I know.
instead, you can have 2 port-channels(2 Links per device) separately with each device for more throughput and resilience purposes.
06-04-2020 03:16 PM
What is the use case here, putting a single Link to port-channel? that is not going to meet the design goals.
You can not mix 2 devices into one port-channel that is not supported as per I know.
instead, you can have 2 port-channels(2 Links per device) separately with each device for more throughput and resilience purposes.
06-05-2020 02:46 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide