FTD Time Doesn't Update

[Balxion]

I'm setting up my Firepower 1120 and its running FTD 7.2.5. When I go to put in the NTP server I used google as a test the time wouldn't update I can ping time.google.com and when i show ntp I think it just gives me the local when I thought I had set up the servers. I'm stuck thanks for the help

[MHM Cisco World]

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/215468-configure-verify-and-troubleshoot-netwo.html

The fpr 1000 is get sync with ntp via fmc.

Do you use fmc ?

[Balxion]

No I'm using FDM

[Marvin Rhoads]

Does your management interface have DNS working and is it able to reach the specified servers?

Test with "ping system time.google.com" from the cli.

[Balxion]

yes i was able to ping from the cli

[balaji.bandi]

check DNS configuration - make sure uses the right interface :

https://www.cisco.com/c/en/us/td/docs/security/firepower/630/fdm/fptd-fdm-config-guide-630/fptd-fdm-system.html#id_73499

[balaji.bandi · Accepted solution]

Try adding IP address of time.google.com and test it

[Balxion]

Thank you the ips worked