05-01-2024 02:51 PM
got to upgrade to 7.0.6.2, currently running FTD on 7.0.5.
do I need to upgrade to 7.0.6, then apply the 7.0.6.2 patch to 7.0.6.
Or will the currently 7.0.6.2 bring my 7.0.5 directly to 7.0.6.2?
05-08-2024 11:26 AM
If you mean 7.2.5 to 7.2.6 then yes you can make that jump with no issue. Make sure to do both the FMC and the FTDs. But I think your version can differ depending on which firewall you have.
If you have support on that device I recommend opening a TAC case, Subject name: [firewall model/ArcaneDoor] Upgrade assistance.
05-08-2024 11:41 AM
https://sec.cloudapps.cisco.com/security/center/resources/asa_ftd_attacks_event_response
If you are on an older version of code you could have a lengthy upgrade process.
05-08-2024 12:16 PM
@tryingtofixit you can go from 7.0.5 direct to 7.0.6.2
If using FMC to manage the FTD(s) you need to upgrade the FMC first, then you can upgrade the managed FTDs.
05-08-2024 01:00 PM
I talked with TAC today and there are new patches out. Be sure you are going to the latest patch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide