We need to access FTD's outside interface from inside for monitoring and troubleshooting. I've set up dynamic NAT and nated IP differs from outside IP but in the same network. I can access external IPs except FTD's.
Packet tracer output
Type: Pix security check
PIX security check: user is not allowed to access a firewall
interface from a network that is connected to another interface
Drop-reason: (no-route) No route to host, Drop-location: frame 0x000000aabaa72f24 flow (NA)/NA
On ASA there was "same-security-traffic permit intra-interface" setting but it is not actual for FTD because traffic should be allowed. Please tell what to check else.
Quick Overview of TETRA on AMP for EndpointsTETRA AV Signature Bandwidth ConsumptionQuick Overview of ETHOS, SPEROS, DFC and SHA256 LookupETHOS, SPEROS, DFC and SHA256 Lookup Bandwidth ConsumptionConsiderationsTETRAETHOS, SPEROS, DFC and SHA256 Lookup
When I log into my application, I'm suddenly asked to create a new organization. Did something change or migrate? I already had an organization.
You may be starting from security.cisco.com and mistakenly clicking "SecureX sign-on...
I followed these instructions and setup all my accounts to use SecureX sign-on, including my AMP account (my Cisco Security Account - CSA). When I use SecureX, and I click on the AMP "launch" button, I have to login again. Why?
Hi ,I would like to know IP and mac address filtering.i have the one webserver.So i would like to restriction to access to web server.I would like do the whitelist to access webserver. i would like to do both IP and MAC filtering to access server.for exam...
Over the past decade, Cisco has published a wealth of security and threat intelligence information for security professionals interested in the state of global cybersecurity. The Cybersecurity Report Series provides detailed accounts of threat landsc...