02-13-2012 01:23 PM - edited 03-11-2019 03:29 PM
Hello Experts,
I have 2 question for FWSM, and i hope i will get answers from you'll
int vlan 100
nameif inside
security-level 100
int vlan200
nameif outside
security-level 0
Thanks
02-24-2012 01:25 PM
Hello,
Anybody can help me for the above.
02-25-2012 09:45 AM
Hi,
Can you provide you provide the configuration of your switch and FWSM and topology of the network.
just to check with you the configuration.
Best Regards.
02-25-2012 11:05 AM
hello,
irewall module 2 vlan-group 2
firewall vlan-group 2
firewall vlan-group 2 400
FWSM(config)# nameif vlan400 inside security50
FWSM(config)# ip address inside 172.24.16.1 255.255.255.0
FWSM(config)# nameif inside
FWSM(config-interface)# no shutdown
FWSM(config)#telnet 172.24.16.0 255.255.255.0 inside
access-list inside permit ip any any
access-group inside in interface inside
02-26-2012 01:05 AM
hi,
this partial configuration are correct. can you ping this interface ?
please can you minitor the interface inside and send me the log (icmp log on interface and telnet).
BR.
02-26-2012 12:11 PM
Hello,
This is my question that when i enabled icmp on inside interface every protocol start working on that inside interface b4 that nothing was working for inside interface.WHY ????????????????????????
for my 2nd question answer please ??????????????????????????????????????
Tx
02-27-2012 12:23 PM
Any hints experts,
This is very strange for me but really it worked, i wanna know the answers from you'll
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide